Arthur Treacher Fish and Chips is the kind of recipe I make when I want a crisp, salty plate of fried fish and potatoes. I have cooked enough copycat-style recipes to know that the small details matter more than a long ingredient list: heat level, when to stir, and when to stop.
What I like about this version is that it gives me a clear path. I can prep the ingredients, follow the timing, and still use my eyes and nose. Frying is mostly about preparation. I cut the fish, soak and dry the potatoes, mix the batter, and set up paper towels before I heat the oil.
I wrote the method the way I actually cook it, with the little pauses included. Those pauses are where I check the pan, scrape the bowl, or let the food rest instead of rushing straight to the plate.
Why I keep coming back to this fish and chips
- It gives me this fish and chips without needing restaurant equipment or a long prep list.
- The ingredients are familiar, but the order of cooking keeps the texture where I want it.
- I can taste and adjust as I go instead of hoping the final bite works.
- The leftovers are useful, which matters when I am cooking on a busy week.
- It has enough flavor to stand on its own but still works with simple sides.
- The method is repeatable once the pan, heat, and timing are set.
What you need and what each one does
salt and freshly ground pepper (to taste). Simple seasoning lets the fish and hot oil do their work. 1 green onion (sliced into 1cm sticks). The green onion gives the batter a fresh savory note. vegetable oil (for frying). A neutral frying oil handles the heat without competing with the fish. 1 egg. Egg helps the batter cling and brown.
1/2 cup finely sifted flour. Sifted flour makes a lighter coating. 250 grams saltwater bream (or other firm white fish). Bream is delicate, so I cut it into manageable strips. 1/2 teaspoon baking powder (reconstructed from source). A small amount lightens the batter. 500 grams russet potatoes. Russets fry up fluffy inside and crisp outside.
Timing and texture notes
Frying is mostly about preparation. I cut the fish, soak and dry the potatoes, mix the batter, and set up paper towels before I heat the oil. I pay attention to the point where the dish changes from separate ingredients into one finished bite, because that is usually where overcooking starts.
For this fish and chips, I also think about how it will be served. I season fried pieces while they are hot so the salt actually sticks. I would rather stop a minute early and adjust than push past the best texture and try to rescue it later.
What I watch while it cooks
I keep my attention on the practical signs: aroma, thickness, color, and how the food moves when I stir or lift it. A timer gets me close, but I trust the pan in front of me before I trust a number on its own.
I also set up the serving pieces before the last step. Hot sauce, warm cheese, grilled chicken, muffins, cookies, and fried fish all have a moment when they are at their best, and I like to be ready for that moment instead of hunting for plates.
When I test a recipe like this, I write down the small adjustments that actually changed the result: a lower burner, a drier ingredient, a longer chill, or a shorter rest. Those notes are the reason I can make the dish again without feeling like I am starting from scratch.
I am careful not to over-correct at the end. A dish that needs more salt, more time, or a splash of liquid usually tells me clearly; a dish that is already done needs me to stop touching it and get it to the table while the texture is still honest.
How I make it
Step 1 — Cut fish
Rinse the fish and pat dry with paper towels. Cut into strips approximately 3 inches long and set aside. This setup step keeps the rest of the recipe calmer for me.
Step 2 — Slice potatoes
Peel and slice the potatoes into thin strips, about 1/4 inch thick. Place them in cold water to keep them from turning brown. I keep the motion steady and use the look and smell of the pan as much as the clock.
Step 3 — Mix dry batter
In a medium mixing bowl, add flour, baking powder, salt, and pepper. Whisk until combined. This is where I slow down, because a little patience gives a better texture.
Step 4 — Add egg and onion
Add the beaten egg and whisk again until smooth. Add the green onions and mix thoroughly. I check the thickest or deepest part rather than the easiest spot to reach.
Step 5 — Fry fish
Heat oil in a large skillet over medium-high heat. Dip fish strips into the batter and carefully place them in hot oil. Fry until golden and crispy on both sides, about 3-4 minutes. I taste or inspect before serving so I can make one last adjustment.
Step 6 — Drain fish
Remove fried fish from the pan and drain on paper towels.
Step 7 — Fry chips
Fry the potatoes in the same oil until golden, about 5 minutes. Drain on paper towels.
Step 8 — Serve
Serve the fish and chips with your favorite dipping sauces or condiments.
Tips from my kitchen
- I read through the steps once before starting because the timing moves faster than it looks.
- I measure the small seasonings before the heat is on so I am not rushing with open jars.
- If the pan starts smelling sharp or scorched, I lower the heat right away instead of trying to stir through it.
- I taste near the end, after the main ingredients have had time to settle together.
- I serve it while the texture is at its best, then store leftovers promptly.
Variations I have actually tried
- I use cod or haddock when bream is not available.
- I add paprika to the flour for color.
- I serve with malt vinegar for a sharper finish.
- I cut the potatoes thicker when I want softer pub-style chips.
- I add lemon zest to the batter for a brighter flavor.
Storing and reheating
I store leftover this fish and chips in a shallow airtight container so it cools quickly and reheats evenly. Most cooked leftovers are best within 3 days, and I label the container when I know the fridge is crowded.
For reheating, I use gentle heat and add a small splash of water, broth, cream, or milk only when the recipe needs loosening. High heat usually fixes nothing; it just makes sauces separate, proteins tighten, or fried coatings soften.
Frequently asked questions
Can I use cod instead of bream?
Yes. Cod, haddock, or pollock all work well as firm white fish substitutes.
How hot should the oil be?
I look for oil that sizzles steadily when batter touches it. If using a thermometer, I aim around 350°F.
Can I make the batter ahead?
I prefer it fresh, but I can mix it a little ahead and refrigerate it. I stir again before dipping fish.
Why did my batter fall off?
The fish was probably wet or the pan was crowded. I pat fish dry and fry in batches.
What should I serve with it?
Tartar sauce, malt vinegar, lemon wedges, coleslaw, and peas all make sense with this plate.
If you make this fish and chips, I would love to hear what you changed after the first batch.
Arthur Treacher Fish and Chips
Description
This Arthur Treacher-style fish and chips fries strips of saltwater bream in a simple flour, egg, baking powder, green onion, salt, and pepper batter, then fries russet potato chips in the same oil. I keep the pieces small so they crisp quickly.
Ingredients You’ll Need
Instructions
- Rinse the fish and pat dry with paper towels. Cut into strips approximately 3 inches long and set aside.
- Peel and slice the potatoes into thin strips, about 1/4 inch thick. Place them in cold water to keep them from turning brown.
- In a medium mixing bowl, add flour, baking powder, salt, and pepper. Whisk until combined.
- Add the beaten egg and whisk again until smooth. Add the green onions and mix thoroughly.
- Heat oil in a large skillet over medium-high heat. Dip fish strips into the batter and carefully place them in hot oil. Fry until golden and crispy on both sides, about 3-4 minutes.
- Remove fried fish from the pan and drain on paper towels.
- Fry the potatoes in the same oil until golden, about 5 minutes. Drain on paper towels.
- Serve the fish and chips with your favorite dipping sauces or condiments.
Nutrition Facts
Servings 4
- Amount Per Serving
- Calories 18kcal
- % Daily Value *
- Total Fat 1g2%
- Trans Fat 0.0g
- Cholesterol 47mg16%
- Sodium 83mg4%
- Potassium 17mg1%
- Protein 2g4%
- Calcium 43 mg
- Iron 0.3 mg
* Percent Daily Values are based on a 2,000 calorie diet. Your daily value may be higher or lower depending on your calorie needs.
Note
Dry well. Moisture is the enemy of crisp batter.
Batch frying. Leave space around each piece.
Baking powder. The source name was incomplete, so I restored it as 1/2 teaspoon baking powder.
Serve fast. Fried fish is at its best right away.
Frequently Asked Questions
Yes. Cod, haddock, or pollock all work well as firm white fish substitutes.
I look for oil that sizzles steadily when batter touches it. If using a thermometer, I aim around 350°F.
I prefer it fresh, but I can mix it a little ahead and refrigerate it. I stir again before dipping fish.
The fish was probably wet or the pan was crowded. I pat fish dry and fry in batches.
Tartar sauce, malt vinegar, lemon wedges, coleslaw, and peas all make sense with this plate.
You may also like...
